Mishin Generator (with 2 capacitive coils)

About the Device:

On the front panel of the device there is a socket for connecting coils and two LED indicators: the red LED indicates the presence of power, the green LED lights up when the coil is connected and indicates that the device is ready for being used.

On the rear panel of the generator there is a DC 2.1 / 5.5 socket for power connection.

The complete set (capacitive coils) includes:

– Sine autogenerator.

– High quality power supply 5V 2000mA, with output filtering, cable (length is 100cm).

– Toroidal capacitive coil with a diameter of 6.5cm. TMA (Tor Mishina Alexandra) is a round coil shaped like a tor. It is smaller than the radius of the zone of influence, but greater than the density of the impact, in contrast to the flat coil, which has a smaller impact density and greater radius of influence. It has a stronger field that DMA, so you should not use it for a long time during one session. The best option is to use DMA then TMA, then again DMA and then TMA and so on. The coil operates at 300 kHz


– Disk capacitive coil of wires in varnish 0.5mm. DMA (Mishin Alexander Disk) is a wooden round disc (flat coil). The disc on both sides are covered with plywood 4mm, which when touched to the body does not change and does not distort the frequency of the coil. The length of the cable from the coil to the generator is 2 m. The coil operates at 300 kHz

– Static field indicator.

DOWNLOAD MANUAL FOR CAPACITIVE COIL

What do we offer?

– Quality: the best workmanship.

– Availability: due to its low price the device is available to everyone.

– Full automation: the generator adjusts itself to the required frequency, minimal human participation.

– The shortest terms of manufacturing and delivery.

Price: $ 160 + delivery expenses 

Methods of payment:  Western Union, Money Gram, wire transfer.

To order Mishin coil (Mishin generator), please, contact us mishinreel@yahoo.com or Whatsapp (+380632866610)

 

Mishin generator (with static coil)

About the Device:

On the front panel of the device there is a socket for connecting coils and two LED indicators: the red LED indicates the presence of power, the green LED lights up when the coil is connected and indicates that the device is ready for being used.

On the rear panel of the generator there is a DC 2.1 / 5.5 socket for power connection.

Mishin-generator-mishin-coilThe complete set (with static coil) includes:

– Autogenerator sine.

– High quality power supply 5V 2000mA, with output filtering, cable (length is 100cm).

– A cable for connection of an autogenerator to Power Bank.

– The disk static coil from a wire in a varnish of 0.4мм.

– Static field indicator.

The discs on both sides are covered with plywood 4mm, which when touched to the body does not change and does not distort the frequency of the coils.

The length of the cable from the coils to the generator is 2 m.

For new coils, only a sinusoidal signal is used at the output of the autogenerator.

DOWNLOAD MANUAL FOR STATIC COIL

What do we offer?

– Quality: the best workmanship.

– Availability: due to its low price the device is available to everyone.

– Full automation: the generator adjusts itself to the required frequency, minimal human participation.

– The shortest terms of manufacturing and delivery.

Price: $ 160 + delivery expenses 

Methods of payment:  Western Union, Money Gram, wire transfer.

To order Mishin coil (Mishin generator), please, contact us mishinreel@yahoo.com or Whatsapp (+380632866610)